Aspire ET-S BDC
Aspire ET-S BDC

Aspire ET-S BVC

On sale $7.59
Out of Stock
Part Number:CMZ-AETS

Choose Options

Silver (Stainless)
Aspire ET-S BVC (bottom vertical coil)

The Aspire ET-S BVC (bottom vertical coil) Glassomizer is a unique design with a new heating element coil technology. As bottom coil clearomizer types are becoming popular, the glassomizer is reinforced with an aluminum shield with a visible clear pyrex glass tube and holds approximately 3.0ml of liquid capacity. The tank can be disassembled into four total parts for easy cleaning and maintenance. Coil heads can be easily replaced by unscrewing the bottom end cap.

Since the tank is made of Pyrex, it won't suffer from the drawbacks of a plastic tank and has a very sturdy chromed metal base and mouthpiece and will create the perfect all day vape with GREAT flavor.

Compare this tank with a standard Bottom Coil Clearomizer (BCC) and you will be astonished by the difference in taste and performance. The Bottom Vertical Coil (BVC) design is a major upgrade when compared to similar single coil tanks not only because of the dual coils, but also because of the uniquely designed replaceable coil and airflow system. It was designed differently to eliminate common issues such as an airy draw, gurgling, and leaking that users often experience with other BCC tanks. It also works to eliminate outside influences on flavor to provide a true and pure taste experience.

Features at a glance:

  • Replaceable Vertical Dual Coil (BVC)
  • eGo Threaded
  • Pyrex Glass Tank (Metal Sleeve)
  • Completely Glue Free
  • Coils are easier, faster and more convenient to change

Each Kit Contains:

  • 1 x Aspire 3.0ml ET-S BVC Glassomizer
  • 1 x 1.8? Dual Coil Head

Additional Aspire ET-S Replacement Heads are also available here. Warning: The Aspire ET-S is NOT compatible with Nautilus, Kanger EVOD & Protank & Protank-2 & Mini Protank coil heads.
Coilheads are compatible with iFree20 by Freemax


  • Diameter: 15mm
  • Height: 76mm
  • Metal Material: Stainless Steel
  • Tank Material: Pyrex
  • Capacity: approx. 3.0 mL
  • Threading: eGo
  • Coil Style: Bottom Coil
  • Resistance: 1.8 O (± 0.1 O)

To fill the Aspire ET-S:

  • Does NOT fill from the Top
  • Turn the clearomizer upside down with the mouthpiece pointing downward
  • There is a possibility that you will get some liquid drainage from the tip so you may wish to use a paper towel or cloth to hold the mouthpiece
  • Unscrew the base of the clearomizer and remove it from the center tube breathing hole
  • Tip the clearomizer body slightly to the side
  • Drip your Vapour Liquid down the inside of the reservoir (We recommend a Syringe or Blunt Needle Tip Cap
  • Avoid getting any liquid in the center tube as this will drain straight out of the mouthpiece into your hand
  • Continue fill the reservoir up to the the top of the center tube ensuring that you do not go over the top
  • Replace the base of the clearomizer and tighten
  • For best results, allow the clearomizer to sit upright for 1 or 2 minutes before using to ensure proper wicking

To replace the Coil Head:

  • Unscrew the Aspire ET-S from your battery or power unit
  • Unscrew the base of the clearomizer and remove it from the center tube breathing hole
  • Place the tank somewhere so that it remains upside-down to prevent any remaining liquid from spilling
  • Unscrew the coil head from the base by turning the post with one hand and holding the base with the other
  • Throw away that bad coil head and replace with a new coil head
  • Replace the base of the clearomizer and tighten


  • A loose coil head can cause leaking
  • Coil heads have an average lifespan between 7 to 15 days (sometimes longer). A coil head should be replaced when it begins to leak, produce less vapour, taste bad and/or stop working entirely.
  • It is not uncommon for the coil head to become loose after refilling the clearomizer a few times. It is good practice to check the coil head to ensure that it is tight when filling.
  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. The battery should be cleaned out with a paper towel or tissue before charging.
  • Ensure that the base is tightly connected to the tank or leaking can occur.
  • Try to keep the tank full of E-Liquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks/gurgling.

NOTE: The product warranty for this device is against DOA only.

Related Items


Aspire ET-S BVC Replacement Coil Heads (5-Pack)
Average Rating(0)
In Stock

Recently Viewed Items

Vapemate Logo
Are you of Legal Smoking Age in your State or Province?
We REQUIRE that you be at least of LEGAL Smoking age to purchase or use products from this site.
We may require that you show a valid government issued Photo ID indicating your date of birth prior to receiving your order.
I am of LEGAL Smoking Age
I am NOT of LEGAL Smoking Age