Marquis RDA (Tobeco)
Tobeco Marquis RDA

Marquis RDA (Tobeco)

Your Price: $24.95
In Stock
Part Number:RDA-TOBMRQ
The Marquis RDA by Tobeco - This device is NOT for beginners - See warnings below

The raised block on the marquis incorporates two 2.5mm air holes bored through the raised block. Building your coil in line with the air holes in the block is easy with included coil building rods and offers you perfect alignment every time. This could possibly be the easiest RDA to build coils. The included coil building rods are design to lock into blind holes positioned directly in line with the raised block air intake holes for vertical coil builds, the smaller coiling tools ( 2.5mm and 3mm) can also slide through the air intake holes for perfectly aligned chimney builds. These coil tools can stay in position until after all your coil wires are connected and tightened. Incorporates two negative deck screws for easy dual coil wire trapping.

Another innovative feature is a crown style wire trap center positive post. This design allows you to “trap” your wires via raised tabs on the center post. Once the screw is tightened, the wires are trapped and cannot slip out. This unique center post design along with the coiling tools will also allow you to add (before cutting wire)or remove wraps from your coil with ease. The raised block and low profile top cap create a very small atomization chamber that will generate great flavor even at higher wattages and low ohm builds. The air flow is fully adjustable (rotating the cap) with a maximum intake of 2x 2.5mm air holes. The top cap incorporates three air intake holes to allow dual coil and single coil builds, single coils can be built in either position.

The top cap on the Marquis includes a removable lid, this will allow for easy access to dripping without the need to re-adjust our airflow. The included 10mm wide bore drip and the drip tip adapters are insulated with a high temp PEEK insulator to help with heat transferring to the drip tip. The drip tip/adapters thread on to the PEEK insulator and are held in the top cap with an o ring for easy removal.

Features at glance

  • 510 threading
  • 22mm outside diameter.
  • 26mm overall height w/o drip tip
  • Dual ground screws easy dual coil setup
  • Dual coil/single coil capable
  • Solid copper positive connections
  • High temp PEEK insulators
  • Custom coiling rods in 2.5mm, 3.0mm, 3.5mm, 4.0mm diameters
  • Blind holes in liquid well for perfect coil alignment
  • 6mm deep liquid well
  • Leak resistant design
  • Seamless flush fit fop cap
  • Double o rings for a firm top cap seal
  • Adjustable airflow ( single and dual coil mode)
  • Internal o ring relief for easy air flow adjustment
  • Reduced atomizer chamber
  • Custom wide bore drip tip (8.7mm Bore)
  • 2x custom lid adapters for 510 style drip tips
  • Custom CNC engraved and serialized (Logo inside on the deck, no etching or engraving on top cap)

Each package contains

  • 1 - Marquis RDA by Tobeco
  • 1 - Wide Bore Drip Tip
  • 1 - 4mm 510 drip tip adapter
  • 1 - Flush 510 drip tip adapter
  • 2 - 2.5 + 3mm Coil Rods
  • 2 - 3.5 + 4mm Coil Rods

NOTE: Before using this device, you should be familiar with Ohm's Law.

NOTE: Because this item is specialized and for advanced users, the product warranty is against manufacturer defects ONLY for a period of 14 days from the date it is received. Any damage from cross threading, thread damage, o-ring damage, and normal wear an tear is not covered.

Related Items

Recently Viewed Items

Vapemate Logo
Are you of Legal Smoking Age in your State or Province?
We REQUIRE that you be at least of LEGAL Smoking age to purchase or use products from this site.
We may require that you show a valid government issued Photo ID indicating your date of birth prior to receiving your order.
I am of LEGAL Smoking Age
I am NOT of LEGAL Smoking Age