Remove the plastic tip by twisting counter-clockwise approximately one turn and pulling the tip from the cylinder. Tilt the cylinder slightly and drip the liquid onto the side of the plastic. You should avoid getting any liquid onto the top of the plastic pad or metal tubing in the center.
Continue filling the cylinder until the wicks are just barely under the top of the liquid. This will bring the level of liquid to about where the red line appears on the image to the right. Replace the plastic tip by reseating it back into the cylinder neck and turn clockwise until it is snug and attach the unit to your battery.When to Refill
Since the liquid is visible, you should refill your liquid when it is close to empty.When to Discard
These are disposable units and they should be discarded when the vapour production becomes weak. The life expectancy is approximately 1-2 weeks.Note
Some of these units will get hairline cracks at the base but appear to cause no leaking issues. There has been great success at "rewicking" the devices.Additional Questions
Please do not hesitate to contact us if you have any additional questions or concerns about your device. Just send us an email us at and we will do everything we can to assist you. Your success is our success.